Professional/industrial lifting stations

Prefabricated lifting stations are an effective solution for collecting and pumping wastewater to the sewer system, when a gravity feed is not available.
They are mainly used in rural or hilly areas with low population density, without an extensive municipal sewer system.
Given their many advantages, lifting stations are today the best choice for a low cost, safe and eco-compatible solution.

A problem and its solution

Polyethylene lifting stations are suitable for any type of installation. Whether surface or underground, outdoors or indoors, they install quickly and easily with minimal construction work.

Weight does matter

Lifting stations made from a lightweight, highly resistant material like polyethylene have a lower shipping cost and are easier to handle and install, while sacrificing nothing in terms of reliability.

Reduce costs

Compared with conventional concrete tanks, prefabricated tanks do not require maintenance and are more resistant to the chemical and mechanical stress induced by black water, as well as being advantageously priced.

Power consumption, but only when needed

Power consumption, but only when needed. Designed for rational, optimised electricity consumption, thanks to the use of pumps rated to match tank capacity, with automatic float switch control of all start/stop functions.

Choose your solution

liftBOX

The liftBOX lifting stations are designed to collect rainwater, wastewater or sewage and transfer it to a higher level, which would otherwise be unreachable due to the distance or by gravity, delivering it to the sewage line or the treatment plant.

The lifting stations consist of a polyethylene tank, an internal pumping system controlled by floats or level probes and an electrical panel.

They may be equipped with a pre-assembled valve operating chamber separated from the wastewater collection chamber for convenient and hygienic maintenance.

The liftBOX lifting stations, which are designed for underground installation, have a volume of 1000 to 19000 litres and can be connected to systems with pressure pipes of size from DN50 to DN150.

Tested according to European standards EN 12050-1 and EN 12050-2
LiftBOX lifting stations comply with European standards EN 12050-1 and EN 12050-2, harmonized under the EU Construction Products Regulation 305/2011 (CPR), which establish the mandatory requirements for CE marking of wastewater lifting systems within the EU. These standards ensure that lifting systems designed for use in buildings for wastewaster management below the flooding level meet the essential safety, hygiene and construction requirements.

Go to product page ›

Zenit Group

Professional and industrial lifting stations